Berlebach Tripod Head Manuel d'utilisateur télécharger pdf (Page 8)

7. To balance your lens, keep holding it until you ac-

quire a feeling for how far you can release the lock-

ing knob and the friction control (d+c) with the lens

still remaining in position. Now loosen the locking

knob of the mounting clamp just enough to move

the lens back and forth into a perfectly balanced

position. Make sure to securely tighten the mount-

ing clamp (e).

8. For optimum results, unscrew the locking knob

achieve the desired amount of friction. Once the

friction is adjusted, your right hand is always free to

remain on the trigger. Your left hand can make any

focus or other lens adjustments, or with a simple

twist of the locking knob (c), instantaneously lock

down your camera system.

9. To remove your camera, rst tighten the locking

knob (c), then unscrew the mounting clamp locking

knob (e) and remove your camera.

Using lenses without tripod mount ring

1. In order to use a camera without a tripod mount

ring (wide angle lenses for example) loosen the fric-

tion and locking knobs, turn the inner U-bar 180°

up to its highest position, lock the the knobs (c+d)

and mount your camera using the knurled thumb-

screw onto the U-bar.

2. For vertical format pictures, just loosen the

knurled thumbscrew and turn the camera 90°, then

tilt the inner u-bar 90° respectively to the desired

position. Be especially careful to suciently tighten

the locking knob when using your Nill tripod head in

this position.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Berlebach Tripod Head Manuel d'utilisateur Page 8